Syncing F26 external repo on Koji

Hey,

on pulp team request, I am adding external repository fedora26
(x86_64) into koji. Initiated the sync, tomorrow I will add that into
koji external repositories. For the record, I installed mrepo from
sources as it was not available in EPEL7 anymore.

Foreman core team haven't decided yet if to carry on with building
against Fedora, version 24 might be the last one. I suggest to
postpone the final decision until bootstrap in COPR is complete, then
we can decide.

We can run into space issues quickly on the new koji again as I am
unable to remove any existing external repo AFAIK. After F26 is
synced, we still have about 200GB space but that's reserved for our
builds.

centos6-x86_64
centos7-x86_64
epel5-i386
epel5-x86_64
epel6-i386
epel6-x86_64
epel7-x86_64
fedora24-x86_64
fedora25-x86_64
jpackage-x86_64
puppetlabsf24-x86_64
puppetlabs6-x86_64
puppetlabs7-x86_64
qpidcopr-i386
qpidcopr-x86_64
rhel5-i386
rhel5-x86_64
rhel6-i386
rhel6-x86_64
rhel7-x86_64
rhscl-rhel6-x86_64
rhscl-rhel7-x86_64

··· -- Later, Lukas @lzap Zapletal

Why stop building against fedora?

··· On Jul 17, 2017 4:27 PM, "Lukas Zapletal" wrote:

Hey,

on pulp team request, I am adding external repository fedora26
(x86_64) into koji. Initiated the sync, tomorrow I will add that into
koji external repositories. For the record, I installed mrepo from
sources as it was not available in EPEL7 anymore.

Foreman core team haven’t decided yet if to carry on with building
against Fedora, version 24 might be the last one. I suggest to
postpone the final decision until bootstrap in COPR is complete, then
we can decide.

We can run into space issues quickly on the new koji again as I am
unable to remove any existing external repo AFAIK. After F26 is
synced, we still have about 200GB space but that’s reserved for our
builds.

centos6-x86_64
centos7-x86_64
epel5-i386
epel5-x86_64
epel6-i386
epel6-x86_64
epel7-x86_64
fedora24-x86_64
fedora25-x86_64
jpackage-x86_64
puppetlabsf24-x86_64
puppetlabs6-x86_64
puppetlabs7-x86_64
qpidcopr-i386
qpidcopr-x86_64
rhel5-i386
rhel5-x86_64
rhel6-i386
rhel6-x86_64
rhel7-x86_64
rhscl-rhel6-x86_64
rhscl-rhel7-x86_64


Later,
Lukas @lzap Zapletal


You received this message because you are subscribed to the Google Groups
"foreman-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to foreman-dev+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Hey,

Sync of Fedora 26 is not yet complete, I will report back when it's ready.

Unfortunately EPEL5 was removed from the mirror we had mrepo
configured to, it was deleted locally without any warning. I set a
different mirror and resyncing EPEL5 once again.

If you encounter any missing packages in external repos, ping me I
have logs so we can resync what's missing.

epel5-i386: Distribution updated (new: 0, removed: 15133) - resyncing now
epel5-x86_64: Distribution updated (new: 0, removed: 18734) - resyncing now
epel6-i386: Distribution updated (new: 468, removed: 21697) - looks
like admin of the mirror deleted old versions of packages - ok
epel6-x86_64: Distribution updated (new: 547, removed: 28310) - ditto
epel7-x86_64: Distribution updated (new: 835, removed: 4662) - ditto
centos6-x86_64: Distribution updated (new: 3185, removed: 0) - looks ok
centos7-x86_64: Distribution updated (new: 3272, removed: 0) - looks ok
qpidcopr-i386: Distribution updated (new: 0, removed: 99) - do we use
that? not sure why it removed packages
qpidcopr-x86_64: Distribution updated (new: 0, removed: 99) - ditto

LZ

··· On Mon, Jul 17, 2017 at 10:26 PM, Lukas Zapletal wrote: > Hey, > > on pulp team request, I am adding external repository fedora26 > (x86_64) into koji. Initiated the sync, tomorrow I will add that into > koji external repositories. For the record, I installed mrepo from > sources as it was not available in EPEL7 anymore. > > Foreman core team haven't decided yet if to carry on with building > against Fedora, version 24 might be the last one. I suggest to > postpone the final decision until bootstrap in COPR is complete, then > we can decide. > > We can run into space issues quickly on the new koji again as I am > unable to remove any existing external repo AFAIK. After F26 is > synced, we still have about 200GB space but that's reserved for our > builds. > > centos6-x86_64 > centos7-x86_64 > epel5-i386 > epel5-x86_64 > epel6-i386 > epel6-x86_64 > epel7-x86_64 > fedora24-x86_64 > fedora25-x86_64 > jpackage-x86_64 > puppetlabsf24-x86_64 > puppetlabs6-x86_64 > puppetlabs7-x86_64 > qpidcopr-i386 > qpidcopr-x86_64 > rhel5-i386 > rhel5-x86_64 > rhel6-i386 > rhel6-x86_64 > rhel7-x86_64 > rhscl-rhel6-x86_64 > rhscl-rhel7-x86_64 > > -- > Later, > Lukas @lzap Zapletal


Later,
Lukas @lzap Zapletal

> Why stop building against fedora?
>

see https://groups.google.com/d/msg/foreman-dev/uAk6LSfXsi4/B_xT2WRtCQAJ

··· On Tue, Jul 18, 2017 at 1:35 PM, Bryan Kearney wrote:

On Jul 17, 2017 4:27 PM, “Lukas Zapletal” lzap@redhat.com wrote:

Hey,

on pulp team request, I am adding external repository fedora26
(x86_64) into koji. Initiated the sync, tomorrow I will add that into
koji external repositories. For the record, I installed mrepo from
sources as it was not available in EPEL7 anymore.

Foreman core team haven’t decided yet if to carry on with building
against Fedora, version 24 might be the last one. I suggest to
postpone the final decision until bootstrap in COPR is complete, then
we can decide.

We can run into space issues quickly on the new koji again as I am
unable to remove any existing external repo AFAIK. After F26 is
synced, we still have about 200GB space but that’s reserved for our
builds.

centos6-x86_64
centos7-x86_64
epel5-i386
epel5-x86_64
epel6-i386
epel6-x86_64
epel7-x86_64
fedora24-x86_64
fedora25-x86_64
jpackage-x86_64
puppetlabsf24-x86_64
puppetlabs6-x86_64
puppetlabs7-x86_64
qpidcopr-i386
qpidcopr-x86_64
rhel5-i386
rhel5-x86_64
rhel6-i386
rhel6-x86_64
rhel7-x86_64
rhscl-rhel6-x86_64
rhscl-rhel7-x86_64


Later,
Lukas @lzap Zapletal


You received this message because you are subscribed to the Google Groups
"foreman-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to foreman-dev+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


You received this message because you are subscribed to the Google Groups
"foreman-dev" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to foreman-dev+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

So all is finally synced:

epel5-i386: Distribution updated (new: 5118, removed: 0)
epel5-x86_64: Distribution updated (new: 6428, removed: 0)
fedora26-x86_64: Distribution updated (new: 53912, removed: 516)

I was just about to add F26 to koji db, but noticed it's already there:

koji list-external-repos | grep fedora-26
fedora-26
file:///mnt/koji/external-repos/www/fedora26-$arch/RPMS.os/
fedora-26-updates
file:///mnt/koji/external-repos/www/fedora26-$arch/RPMS.updates/

So I guess my job is done then. Have fun.

··· On Tue, Jul 18, 2017 at 9:59 AM, Lukas Zapletal wrote: > Hey, > > Sync of Fedora 26 is not yet complete, I will report back when it's ready. > > Unfortunately EPEL5 was removed from the mirror we had mrepo > configured to, it was deleted locally without any warning. I set a > different mirror and resyncing EPEL5 once again. > > If you encounter any missing packages in external repos, ping me I > have logs so we can resync what's missing. > > epel5-i386: Distribution updated (new: 0, removed: 15133) - resyncing now > epel5-x86_64: Distribution updated (new: 0, removed: 18734) - resyncing now > epel6-i386: Distribution updated (new: 468, removed: 21697) - looks > like admin of the mirror deleted old versions of packages - ok > epel6-x86_64: Distribution updated (new: 547, removed: 28310) - ditto > epel7-x86_64: Distribution updated (new: 835, removed: 4662) - ditto > centos6-x86_64: Distribution updated (new: 3185, removed: 0) - looks ok > centos7-x86_64: Distribution updated (new: 3272, removed: 0) - looks ok > qpidcopr-i386: Distribution updated (new: 0, removed: 99) - do we use > that? not sure why it removed packages > qpidcopr-x86_64: Distribution updated (new: 0, removed: 99) - ditto > > LZ > > On Mon, Jul 17, 2017 at 10:26 PM, Lukas Zapletal wrote: >> Hey, >> >> on pulp team request, I am adding external repository fedora26 >> (x86_64) into koji. Initiated the sync, tomorrow I will add that into >> koji external repositories. For the record, I installed mrepo from >> sources as it was not available in EPEL7 anymore. >> >> Foreman core team haven't decided yet if to carry on with building >> against Fedora, version 24 might be the last one. I suggest to >> postpone the final decision until bootstrap in COPR is complete, then >> we can decide. >> >> We can run into space issues quickly on the new koji again as I am >> unable to remove any existing external repo AFAIK. After F26 is >> synced, we still have about 200GB space but that's reserved for our >> builds. >> >> centos6-x86_64 >> centos7-x86_64 >> epel5-i386 >> epel5-x86_64 >> epel6-i386 >> epel6-x86_64 >> epel7-x86_64 >> fedora24-x86_64 >> fedora25-x86_64 >> jpackage-x86_64 >> puppetlabsf24-x86_64 >> puppetlabs6-x86_64 >> puppetlabs7-x86_64 >> qpidcopr-i386 >> qpidcopr-x86_64 >> rhel5-i386 >> rhel5-x86_64 >> rhel6-i386 >> rhel6-x86_64 >> rhel7-x86_64 >> rhscl-rhel6-x86_64 >> rhscl-rhel7-x86_64 >> >> -- >> Later, >> Lukas @lzap Zapletal > > > > -- > Later, > Lukas @lzap Zapletal


Later,
Lukas @lzap Zapletal