Problem: Install.img fails to download
Expected outcome: The download should complete and install should progress.
Foreman and Proxy versions:
Foreman 3.2.0
No external proxies
Foreman and Proxy plugin versions:
foreman-tasks 6.0.0
foreman_discovery 20.0.1
foreman_remote_execution 6.0.0
katello 4.4.0.rc2
Distribution and version:
CentOS Stream release 8
Other relevant data:
I can download the install.img using my web browser and get the same file size and sum as I can find on one of the distro mirrors.
C7 installs work just fine for me.
Welcome to CentOS Stream 8 dracut-049-201.git20220131.el8 (Initramfs)!
[ 11.053357] systemd[1]: No hostname configured.
[ 11.054533] systemd[1]: Set hostname to <localhost>.
[ 11.056056] systemd[1]: Initializing machine ID from KVM UUID.
[ 11.125559] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 11.130340] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 11.133793] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Reached target Timers.
[ OK ] Listening on Open-iSCSI iscsid Socket.
[ 11.142416] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[ 11.145080] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 11.147277] usb 1-1: Product: QEMU USB Tablet
[ 11.148639] usb 1-1: Manufacturer: QEMU
[ 11.149826] usb 1-1: SerialNumber: 42
[ OK ] Listening on Open-iSCSI iscsiuio Socket.[ 11.153298] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[ 11.157272] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:02:00.0-1/input0
[ OK ] Reached target Slices.
[ OK ] Listening on Journal Socket.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
Starting Create list of required st…ce nodes for the current kernel...
Starting Setup Virtual Console...
Starting iSCSI UserSpace I/O driver...
Starting Journal Service...
Starting Load Kernel Modules...
[ OK ] Reached target Initrd Root Device.
[ 11.201271] Loading iSCSI transport class v2.0-870.
[ 11.202513] IPMI message handler: version 39.2
[ 11.205958] ipmi device interface
[ OK ] Listening on udev Kernel Socket.
[ OK ] Reached target Sockets.
[ OK ] Started iSCSI UserSpace I/O driver.
[ OK ] Started Journal Service.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started Setup Virtual Console.
[ OK ] Started Load Kernel Modules.
Starting Apply Kernel Variables...
Starting dracut cmdline hook...
Starting Create Static Device Nodes in /dev...
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
[ 11.434379] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 11.506806] dracut-cmdline[388]: Warning: 'ks=http://foreman-c8.netvel.net/unattended/provision?token=29868e3f-d1bd-426a-8707-4f772aae83d8'
[ 11.509074] dracut-cmdline[388]: Warning: ks has been deprecated. All usage of Anaconda boot arguments without 'inst.' prefix have been deprecated and will be removed in a future major release. Please use inst.ks instead.
[ 11.512404] dracut-cmdline[388]: Warning: 'kssendmac='
[ 11.513430] dracut-cmdline[388]: Warning: kssendmac has been deprecated. All usage of Anaconda boot arguments without 'inst.' prefix have been deprecated and will be removed in a future major release. Please use inst.ks.sendmac instead.
[ 11.681508] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 11.722112] iscsi: registered transport (tcp)
[ 11.746478] iscsi: registered transport (qla4xxx)
[ 11.747996] QLogic iSCSI HBA Driver
[ 11.756532] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[ 11.803803] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015)
[ 11.805782] iscsi: registered transport (cxgb4i)
[ 11.814572] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[ 11.820791] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[ 11.822621] iscsi: registered transport (bnx2i)
[ 11.834234] iscsi: registered transport (be2iscsi)
[ 11.835405] In beiscsi_module_init, tt=000000005def78c3
[ OK ] Started dracut cmdline hook.
Starting dracut pre-udev hook...
[ 11.924551] cramfs is deprecated and is slated for removal in a future RHEL release. Please use an alternative file system like squashfs.
[ 11.948373] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 11.975972] dracut-pre-udev[652]: anaconda-modprobe: Module floppy not found
[ 12.000416] No iBFT detected.
[ 12.092018] raid6: sse2x1 gen() 8433 MB/s
[ 12.110016] raid6: sse2x1 xor() 5583 MB/s
[ 12.128017] raid6: sse2x2 gen() 6754 MB/s
[ 12.146015] raid6: sse2x2 xor() 6588 MB/s
[ 12.164014] raid6: sse2x4 gen() 8326 MB/s
[ 12.182010] raid6: sse2x4 xor() 3460 MB/s
[ 12.183286] raid6: using algorithm sse2x1 gen() 8433 MB/s
[ 12.184566] raid6: .... xor() 5583 MB/s, rmw enabled
[ 12.185811] raid6: using ssse3x2 recovery algorithm
[ 12.188397] async_tx: api initialized (async)
[ 12.191062] xor: measuring software checksum speed
[ 12.202008] prefetch64-sse: 12584.000 MB/sec
[ 12.213016] generic_sse: 8652.000 MB/sec
[ 12.214130] xor: using function: prefetch64-sse (12584.000 MB/sec)
[ 12.346185] device-mapper: uevent: version 1.0.3
[ 12.347959] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 12.445722] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 12.479684] dracut-pre-udev[652]: anaconda-modprobe: Module cbc not found
[ 12.508572] dracut-pre-udev[835]: modprobe: ERROR: could not insert 'sha256_mb': No such device
[ 12.614230] RPC: Registered named UNIX socket transport module.
[ 12.616439] RPC: Registered udp transport module.
[ 12.618162] RPC: Registered tcp transport module.
[ 12.619876] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ OK ] Started dracut pre-udev hook.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting dracut pre-trigger hook...
[ OK ] Started dracut pre-trigger hook.
Starting udev Coldplug all Devices...
[ 12.908070] pcieport 0000:00:02.6: pciehp: Slot(0-6): No device found
Mounting Kernel Configuration File System...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Started udev Coldplug all Devices.
Starting Show Plymouth Boot Screen...
Starting udev Wait for Complete Device Initialization...
[ 13.131617] virtio_blk virtio2: [vda] 209715200 512-byte logical blocks (107 GB/100 GiB)
[ 13.134577] vda: detected capacity change from 0 to 107374182400
[ 13.154851] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[ 13.175220] vda: vda1 vda2
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ 13.187926] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 13.190654] ahci 0000:00:1f.2: flags: 64bit ncq only
[ 13.224423] scsi host0: ahci
[ 13.251528] 8021q: 802.1Q VLAN Support v1.8
[ 13.276388] scsi host1: ahci
[ 13.277979] scsi host2: ahci
[ 13.279771] scsi host3: ahci
[ 13.283052] scsi host4: ahci
[ 13.285921] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[ 13.286699] virtio_net virtio0 enp1s0: renamed from eth0
[ 13.287613] qxl 0000:00:01.0: vgaarb: deactivate vga console
[ 13.292903] Console: switching to colour dummy device 80x25
[ 13.294135] scsi host5: ahci
[ 13.296033] [drm] Device Version 0.0
[ 13.296653] ata1: SATA max UDMA/133 abar m4096@0xfce1d000 port 0xfce1d100 irq 47
[ 13.297135] [drm] Compression level 0 log level 0
[ 13.297138] [drm] 12286 io pages at offset 0x1000000
[ 13.300082] ata2: SATA max UDMA/133 abar m4096@0xfce1d000 port 0xfce1d180 irq 47
[ 13.301753] [drm] 16777216 byte draw area at offset 0x0
[ 13.301756] [drm] RAM header offset: 0x3ffe000
[ 13.302079] [drm] qxl: 16M of VRAM memory size
[ 13.303701] ata3: SATA max UDMA/133 abar m4096@0xfce1d000 port 0xfce1d200 irq 47
[ 13.305692] [drm] qxl: 63M of IO pages memory ready (VRAM domain)
[ 13.305702] [drm] qxl: 64M of Surface memory size
[ 13.318285] [drm] slot 0 (main): base 0xf4000000, size 0x03ffe000
[ 13.319058] ata4: SATA max UDMA/133 abar m4096@0xfce1d000 port 0xfce1d280 irq 47
[ 13.322357] [drm] slot 1 (surfaces): base 0xf8000000, size 0x04000000
[ 13.323798] ata5: SATA max UDMA/133 abar m4096@0xfce1d000 port 0xfce1d300 irq 47
[ 13.326671] [drm] Initialized qxl 0.1.0 20120117 for 0000:00:01.0 on minor 0
[ 13.326771] ata6: SATA max UDMA/133 abar m4096@0xfce1d000 port 0xfce1d380 irq 47
[ 13.336838] fbcon: qxldrmfb (fb0) is primary device
[ 13.341288] Console: switching to colour frame buffer device 128x48
[ 13.360244] qxl 0000:00:01.0: [drm] fb0: qxldrmfb frame buffer device
[ 13.645486] ata4: SATA link down (SStatus 0 SControl 300)
[ 13.647664] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 13.649826] ata2: SATA link down (SStatus 0 SControl 300)
[ 13.651437] ata3: SATA link down (SStatus 0 SControl 300)
[ 13.653171] ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 13.654426] ata1.00: applying bridge limits
[ 13.655657] ata6: SATA link down (SStatus 0 SControl 300)
[ 13.657611] ata5: SATA link down (SStatus 0 SControl 300)
[ 13.659479] ata1.00: configured for UDMA/100
[ 13.660955] scsi 0:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 13.676973] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 13.707430] sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 13.709039] cdrom: Uniform CD-ROM driver Revision: 3.20
[ OK ] Started udev Wait for Complete Device Initialization.
Starting Device-Mapper Multipath Device Controller...
[ OK ] Started Device-Mapper Multipath Device Controller.
Starting Open-iSCSI...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Basic System.
[ OK ] Started Open-iSCSI.
Starting dracut initqueue hook...
[ 14.260735] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 14.263161] 8021q: adding VLAN 0 to HW filter on device enp1s0
[ 15.099832] dracut-initqueue[1266]: % Total % Received % Xferd Average Speed Time Time Time Current
[ 15.100121] dracut-initqueue[1266]: Dload Upload Total Spent Left Speed
100 3893 0 3893 0 0 2618 0 --:--:-- 0:00:01 --:--:-- 2618
[ 17.671481] dracut-initqueue[1383]: % Total % Received % Xferd Average Speed Time Time Time Current
[ 17.671724] dracut-initqueue[1383]: Dload Upload Total Spent Left Speed
80 767M 80 614M 0 0 1013k 0 0:12:55 0:10:21 0:02:34 0
80 767M 80 614M 0 0 689k 0 0:19:00 0:15:13 0:03:47 056 0:10:22 0:02:34 0
[ 930.921574] dracut-initqueue[1383]: curl: (56) Recv failure: Connection timed out
[ 945.296616] loop: module loaded
[ 945.302951] loop0: detected capacity change from 0 to 644848640
[ 945.311665] dracut-initqueue[1480]: losetup: /tmp/curl_fetch_url1/install.img: Warning: file does not fit into a 512-byte sector; the end of the file will be ignored.
[ 945.318962] dracut: FATAL: Failed to find a root filesystem in /tmp/curl_fetch_url1/install.img.
[ 945.318585] d[ 945.322719] dracut: Refusing to continue
racut-initqueue[1483]: mount: /run/initramfs/squashfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
[ 945.355233] printk: systemd-shutdow: 16 output lines suppressed due to ratelimiting
[ 945.367068] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 945.370889] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 945.408550] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 945.421377] systemd-shutdown[1]: Unmounting file systems.
[ 945.425362] [1498]: Remounting '/var/lib/nfs/rpc_pipefs' read-only in with options '(null)'.
[ 945.430448] [1499]: Unmounting '/var/lib/nfs/rpc_pipefs'.
[ 945.441331] [1501]: Remounting '/' read-only in with options 'size=7963032k,nr_inodes=1990758'.
[ 945.446144] systemd-shutdown[1]: All filesystems unmounted.
[ 945.448595] systemd-shutdown[1]: Deactivating swaps.
[ 945.450826] systemd-shutdown[1]: All swaps deactivated.
[ 945.453116] systemd-shutdown[1]: Detaching loop devices.
[ 945.456185] systemd-shutdown[1]: Detaching loopback /dev/loop0.
[ 945.464606] systemd-shutdown[1]: All loop devices detached.
[ 945.505431] reboot: System halted