After creating a new host I can download the generic image, which can be used to boot/install the host. This generic image points at the Katello/Foreman server itself. How do I download a generic image that points at a Capsule/Smart Proxy?
I've tried creating a host and setting its content source to the Capsule but the generic boot disk still points at the primary Kat/TFM server.
Make sure both TFTP and Templates features are enabled on Subnet
proxy, then rebuild the host (hit Build button) and you should see
templated bootdisk.
Can you please upvote this bug? I want to start counting on this,
other users often hit this.
···
On Tue, Feb 14, 2017 at 3:59 PM, 'Jason B. Nance' via Foreman users wrote:
> Hello,
>
> After creating a new host I can download the generic image, which can be used to boot/install the host. This generic image points at the Katello/Foreman server itself. How do I download a generic image that points at a Capsule/Smart Proxy?
>
> I've tried creating a host and setting its content source to the Capsule but the generic boot disk still points at the primary Kat/TFM server.
>
> Thanks,
>
> j
>
> --
> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to foreman-users+unsubscribe@googlegroups.com.
> To post to this group, send email to foreman-users@googlegroups.com.
> Visit this group at https://groups.google.com/group/foreman-users.
> For more options, visit https://groups.google.com/d/optout.
I already had the settings as you indicated but the generic image for this host is pointing to the primary Katello/Foreman server. I tried cancelling the build and clicking build again but results were same.
Am I misunderstanding how this should work? Is the "generic" image always the same regardless of content host/location/subnet? Should I be using the subnet image instead?
Thanks,
j
···
----- Original Message -----
From: "Lukas Zapletal"
To: "Foreman Users"
Sent: Wednesday, February 15, 2017 5:54:41 AM
Subject: Re: [foreman-users] Generic Image For Capsule
Make sure both TFTP and Templates features are enabled on Subnet
proxy, then rebuild the host (hit Build button) and you should see
templated bootdisk.
Can you please upvote this bug? I want to start counting on this,
other users often hit this.
After creating a new host I can download the generic image, which can be used to boot/install the host. This generic image points at the Katello/Foreman server itself. How do I download a generic image that points at a Capsule/Smart Proxy?
I’ve tried creating a host and setting its content source to the Capsule but the generic boot disk still points at the primary Kat/TFM server.
Ahh… this is much simpler than I though. The "subnet" image basically is the "generic" image just pointing to the Capsule/Smart Proxy. The name of the ISO was what was throwing me off. I thought there was something subnet-specific in there, but after mounting and comparing I see otherwise.
j
···
----- Original Message -----
From: "Foreman Users"
To: "Foreman Users"
Sent: Wednesday, February 15, 2017 8:44:18 AM
Subject: Re: [foreman-users] Generic Image For Capsule
Hi Lukas,
I already had the settings as you indicated but the generic image for this host is pointing to the primary Katello/Foreman server. I tried cancelling the build and clicking build again but results were same.
Am I misunderstanding how this should work? Is the “generic” image always the same regardless of content host/location/subnet? Should I be using the subnet image instead?
Thanks,
j
----- Original Message -----
From: “Lukas Zapletal” lzap@redhat.com
To: “Foreman Users” foreman-users@googlegroups.com
Sent: Wednesday, February 15, 2017 5:54:41 AM
Subject: Re: [foreman-users] Generic Image For Capsule
Make sure both TFTP and Templates features are enabled on Subnet
proxy, then rebuild the host (hit Build button) and you should see
templated bootdisk.
Can you please upvote this bug? I want to start counting on this,
other users often hit this.
After creating a new host I can download the generic image, which can be used to boot/install the host. This generic image points at the Katello/Foreman server itself. How do I download a generic image that points at a Capsule/Smart Proxy?
I’ve tried creating a host and setting its content source to the Capsule but the generic boot disk still points at the primary Kat/TFM server.
I found that out the hard way a while back too Jason. This should be more
visible on the UI somewhere!
···
On Wednesday, February 15, 2017 at 9:58:09 AM UTC-5, Jason B. Nance wrote:
>
> Ahh... this is much simpler than I though. The "subnet" image basically
> is the "generic" image just pointing to the Capsule/Smart Proxy. The name
> of the ISO was what was throwing me off. I thought there was something
> subnet-specific in there, but after mounting and comparing I see otherwise.
>
> j
>
>
> ----- Original Message -----
> From: "Foreman Users" <forema...@googlegroups.com >
> To: "Foreman Users" <forema...@googlegroups.com >
> Sent: Wednesday, February 15, 2017 8:44:18 AM
> Subject: Re: [foreman-users] Generic Image For Capsule
>
> Hi Lukas,
>
> I already had the settings as you indicated but the generic image for this
> host is pointing to the primary Katello/Foreman server. I tried cancelling
> the build and clicking build again but results were same.
>
> Am I misunderstanding how this should work? Is the "generic" image always
> the same regardless of content host/location/subnet? Should I be using the
> subnet image instead?
>
> Thanks,
>
> j
>
>
> ----- Original Message -----
> From: "Lukas Zapletal" <lz...@redhat.com >
> To: "Foreman Users" <forema...@googlegroups.com >
> Sent: Wednesday, February 15, 2017 5:54:41 AM
> Subject: Re: [foreman-users] Generic Image For Capsule
>
> Make sure both TFTP and Templates features are enabled on Subnet
> proxy, then rebuild the host (hit Build button) and you should see
> templated bootdisk.
>
> Can you please upvote this bug? I want to start counting on this,
> other users often hit this.
>
> http://projects.theforeman.org/issues/17316
>
> LZ
>
> On Tue, Feb 14, 2017 at 3:59 PM, 'Jason B. Nance' via Foreman users > <forema...@googlegroups.com > wrote:
> > Hello,
> >
> > After creating a new host I can download the generic image, which can be
> used to boot/install the host. This generic image points at the
> Katello/Foreman server itself. How do I download a generic image that
> points at a Capsule/Smart Proxy?
> >
> > I've tried creating a host and setting its content source to the Capsule
> but the generic boot disk still points at the primary Kat/TFM server.
> >
> > Thanks,
> >
> > j
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups "Foreman users" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> an email to foreman-user...@googlegroups.com .
> > To post to this group, send email to forema...@googlegroups.com
> .
> > Visit this group at https://groups.google.com/group/foreman-users.
> > For more options, visit https://groups.google.com/d/optout.
>
>
>
> --
> Later,
> Lukas @lzap Zapletal
>
> --
> You received this message because you are subscribed to the Google Groups
> "Foreman users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to foreman-user...@googlegroups.com .
> To post to this group, send email to forema...@googlegroups.com
> .
> Visit this group at https://groups.google.com/group/foreman-users.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Foreman users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to foreman-user...@googlegroups.com .
> To post to this group, send email to forema...@googlegroups.com
> .
> Visit this group at https://groups.google.com/group/foreman-users.
> For more options, visit https://groups.google.com/d/optout.
>
Ok, guys what label would you recommend then? My eyes are very biased
after these years spending on this codebase, help!
LZ
···
On Thu, Feb 16, 2017 at 5:40 AM, Andrew Schofield wrote:
> I found that out the hard way a while back too Jason. This should be more
> visible on the UI somewhere!
>
> On Wednesday, February 15, 2017 at 9:58:09 AM UTC-5, Jason B. Nance wrote:
>>
>> Ahh... this is much simpler than I though. The "subnet" image basically
>> is the "generic" image just pointing to the Capsule/Smart Proxy. The name
>> of the ISO was what was throwing me off. I thought there was something
>> subnet-specific in there, but after mounting and comparing I see otherwise.
>>
>> j
>>
>>
>> ----- Original Message -----
>> From: "Foreman Users"
>> To: "Foreman Users"
>> Sent: Wednesday, February 15, 2017 8:44:18 AM
>> Subject: Re: [foreman-users] Generic Image For Capsule
>>
>> Hi Lukas,
>>
>> I already had the settings as you indicated but the generic image for this
>> host is pointing to the primary Katello/Foreman server. I tried cancelling
>> the build and clicking build again but results were same.
>>
>> Am I misunderstanding how this should work? Is the "generic" image always
>> the same regardless of content host/location/subnet? Should I be using the
>> subnet image instead?
>>
>> Thanks,
>>
>> j
>>
>>
>> ----- Original Message -----
>> From: "Lukas Zapletal"
>> To: "Foreman Users"
>> Sent: Wednesday, February 15, 2017 5:54:41 AM
>> Subject: Re: [foreman-users] Generic Image For Capsule
>>
>> Make sure both TFTP and Templates features are enabled on Subnet
>> proxy, then rebuild the host (hit Build button) and you should see
>> templated bootdisk.
>>
>> Can you please upvote this bug? I want to start counting on this,
>> other users often hit this.
>>
>> http://projects.theforeman.org/issues/17316
>>
>> LZ
>>
>> On Tue, Feb 14, 2017 at 3:59 PM, 'Jason B. Nance' via Foreman users >> wrote:
>> > Hello,
>> >
>> > After creating a new host I can download the generic image, which can be
>> > used to boot/install the host. This generic image points at the
>> > Katello/Foreman server itself. How do I download a generic image that
>> > points at a Capsule/Smart Proxy?
>> >
>> > I've tried creating a host and setting its content source to the Capsule
>> > but the generic boot disk still points at the primary Kat/TFM server.
>> >
>> > Thanks,
>> >
>> > j
>> >
>> > --
>> > You received this message because you are subscribed to the Google
>> > Groups "Foreman users" group.
>> > To unsubscribe from this group and stop receiving emails from it, send
>> > an email to foreman-user...@googlegroups.com.
>> > To post to this group, send email to forema...@googlegroups.com.
>> > Visit this group at https://groups.google.com/group/foreman-users.
>> > For more options, visit https://groups.google.com/d/optout.
>>
>>
>>
>> --
>> Later,
>> Lukas @lzap Zapletal
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Foreman users" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to foreman-user...@googlegroups.com.
>> To post to this group, send email to forema...@googlegroups.com.
>> Visit this group at https://groups.google.com/group/foreman-users.
>> For more options, visit https://groups.google.com/d/optout.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Foreman users" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to foreman-user...@googlegroups.com.
>> To post to this group, send email to forema...@googlegroups.com.
>> Visit this group at https://groups.google.com/group/foreman-users.
>> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Foreman users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to foreman-users+unsubscribe@googlegroups.com.
> To post to this group, send email to foreman-users@googlegroups.com.
> Visit this group at https://groups.google.com/group/foreman-users.
> For more options, visit https://groups.google.com/d/optout.
In the boot disk drop down I would most likely change subnet image to content host image, though I can see how that is misleading since the image isn't really based on the selected content host but the subnet configuration. How about Capsule/Smart Proxy generic image instead?
I would name the ISO the same way the generic image is, though, since it is the same as the generic but pointed at the Capsule/Smart Proxy.
j
···
----- Original Message -----
From: "Lukas Zapletal"
To: "Foreman Users"
Cc: "Jason Nance"
Sent: Tuesday, February 21, 2017 1:33:32 AM
Subject: Re: [foreman-users] Generic Image For Capsule
Ok, guys what label would you recommend then? My eyes are very biased
after these years spending on this codebase, help!
LZ
On Thu, Feb 16, 2017 at 5:40 AM, Andrew Schofield aas@ourhavens.co.uk wrote:
I found that out the hard way a while back too Jason. This should be more
visible on the UI somewhere!
On Wednesday, February 15, 2017 at 9:58:09 AM UTC-5, Jason B. Nance wrote:
Ahh… this is much simpler than I though. The “subnet” image basically
is the “generic” image just pointing to the Capsule/Smart Proxy. The name
of the ISO was what was throwing me off. I thought there was something
subnet-specific in there, but after mounting and comparing I see otherwise.
j
----- Original Message -----
From: “Foreman Users” forema...@googlegroups.com
To: “Foreman Users” forema...@googlegroups.com
Sent: Wednesday, February 15, 2017 8:44:18 AM
Subject: Re: [foreman-users] Generic Image For Capsule
Hi Lukas,
I already had the settings as you indicated but the generic image for this
host is pointing to the primary Katello/Foreman server. I tried cancelling
the build and clicking build again but results were same.
Am I misunderstanding how this should work? Is the “generic” image always
the same regardless of content host/location/subnet? Should I be using the
subnet image instead?
Thanks,
j
----- Original Message -----
From: “Lukas Zapletal” lz...@redhat.com
To: “Foreman Users” forema...@googlegroups.com
Sent: Wednesday, February 15, 2017 5:54:41 AM
Subject: Re: [foreman-users] Generic Image For Capsule
Make sure both TFTP and Templates features are enabled on Subnet
proxy, then rebuild the host (hit Build button) and you should see
templated bootdisk.
Can you please upvote this bug? I want to start counting on this,
other users often hit this.
On Tue, Feb 14, 2017 at 3:59 PM, ‘Jason B. Nance’ via Foreman users >> forema...@googlegroups.com wrote:
Hello,
After creating a new host I can download the generic image, which can be
used to boot/install the host. This generic image points at the
Katello/Foreman server itself. How do I download a generic image that
points at a Capsule/Smart Proxy?
I’ve tried creating a host and setting its content source to the Capsule
but the generic boot disk still points at the primary Kat/TFM server.
Well, it's tricky. I think there are a few options:
In the host, have a expandable sub-menu that has all the capsules /
proxies listed?
In a hostgroup, have an option to download a boot disk (based on the
content server settings?)
Actually have a boot disk download from the capsule / proxy settings
themselves?
A combination of these?
Certainly having it named subnet is just plain incorrect as has been
mentioned before, there is nothing subnet specific - further in order to
generate a subnet (capsule / proxy!) disk image, you have to have a TFTP
capsule set - there is no technical reason for this though.
Also, having to go to a host (and adjusting the subnet settings) just to
get generic ISO(s) is rather less than optimal as there is nowhere else to
get this! For example, we have 4 (key, default) ISO's. 1 for each region -
they point to our regional load balancers. But to get these, we have to
create a generic host. Adjust the hosts subnet (to get the right capsule in
the subnet settings). Put the server into build mode. Download a subnet
ISO. Delete the host. Neither obvious nor intuitive.
From the top of my head, I can't remember the name they get, but I'd
suggest the capsule / proxy image is named after, well, the capsule / proxy.
···
On Tuesday, February 21, 2017 at 9:27:24 AM UTC-5, Jason B. Nance wrote:
>
> In the boot disk drop down I would most likely change subnet image to
> content host image, though I can see how that is misleading since the image
> isn't really based on the selected content host but the subnet
> configuration. How about Capsule/Smart Proxy generic image instead?
>
> I would name the ISO the same way the generic image is, though, since it
> is the same as the generic but pointed at the Capsule/Smart Proxy.
>
> j
>
>
> ----- Original Message -----
> From: "Lukas Zapletal" <lz...@redhat.com >
> To: "Foreman Users" <forema...@googlegroups.com >
> Cc: "Jason Nance" <ja...@tresgeek.net >
> Sent: Tuesday, February 21, 2017 1:33:32 AM
> Subject: Re: [foreman-users] Generic Image For Capsule
>
> Ok, guys what label would you recommend then? My eyes are very biased
> after these years spending on this codebase, help! :-)
>
> LZ
>
> On Thu, Feb 16, 2017 at 5:40 AM, Andrew Schofield > wrote:
> > I found that out the hard way a while back too Jason. This should be
> more
> > visible on the UI somewhere!
> >
> > On Wednesday, February 15, 2017 at 9:58:09 AM UTC-5, Jason B. Nance > wrote:
> >>
> >> Ahh... this is much simpler than I though. The "subnet" image
> basically
> >> is the "generic" image just pointing to the Capsule/Smart Proxy. The
> name
> >> of the ISO was what was throwing me off. I thought there was something
> >> subnet-specific in there, but after mounting and comparing I see
> otherwise.
> >>
> >> j
> >>
> >>
> >> ----- Original Message -----
> >> From: "Foreman Users"
> >> To: "Foreman Users"
> >> Sent: Wednesday, February 15, 2017 8:44:18 AM
> >> Subject: Re: [foreman-users] Generic Image For Capsule
> >>
> >> Hi Lukas,
> >>
> >> I already had the settings as you indicated but the generic image for
> this
> >> host is pointing to the primary Katello/Foreman server. I tried
> cancelling
> >> the build and clicking build again but results were same.
> >>
> >> Am I misunderstanding how this should work? Is the "generic" image
> always
> >> the same regardless of content host/location/subnet? Should I be using
> the
> >> subnet image instead?
> >>
> >> Thanks,
> >>
> >> j
> >>
> >>
> >> ----- Original Message -----
> >> From: "Lukas Zapletal"
> >> To: "Foreman Users"
> >> Sent: Wednesday, February 15, 2017 5:54:41 AM
> >> Subject: Re: [foreman-users] Generic Image For Capsule
> >>
> >> Make sure both TFTP and Templates features are enabled on Subnet
> >> proxy, then rebuild the host (hit Build button) and you should see
> >> templated bootdisk.
> >>
> >> Can you please upvote this bug? I want to start counting on this,
> >> other users often hit this.
> >>
> >> http://projects.theforeman.org/issues/17316
> >>
> >> LZ
> >>
> >> On Tue, Feb 14, 2017 at 3:59 PM, 'Jason B. Nance' via Foreman users > >> wrote:
> >> > Hello,
> >> >
> >> > After creating a new host I can download the generic image, which can
> be
> >> > used to boot/install the host. This generic image points at the
> >> > Katello/Foreman server itself. How do I download a generic image
> that
> >> > points at a Capsule/Smart Proxy?
> >> >
> >> > I've tried creating a host and setting its content source to the
> Capsule
> >> > but the generic boot disk still points at the primary Kat/TFM server.
> >> >
> >> > Thanks,
> >> >
> >> > j
> >> >
> >> > --
> >> > You received this message because you are subscribed to the Google
> >> > Groups "Foreman users" group.
> >> > To unsubscribe from this group and stop receiving emails from it,
> send
> >> > an email to foreman-user...@googlegroups.com.
> >> > To post to this group, send email to forema...@googlegroups.com.
> >> > Visit this group at https://groups.google.com/group/foreman-users.
> >> > For more options, visit https://groups.google.com/d/optout.
> >>
> >>
> >>
> >> --
> >> Later,
> >> Lukas @lzap Zapletal
> >>
> >> --
> >> You received this message because you are subscribed to the Google
> Groups
> >> "Foreman users" group.
> >> To unsubscribe from this group and stop receiving emails from it, send
> an
> >> email to foreman-user...@googlegroups.com.
> >> To post to this group, send email to forema...@googlegroups.com.
> >> Visit this group at https://groups.google.com/group/foreman-users.
> >> For more options, visit https://groups.google.com/d/optout.
> >>
> >> --
> >> You received this message because you are subscribed to the Google
> Groups
> >> "Foreman users" group.
> >> To unsubscribe from this group and stop receiving emails from it, send
> an
> >> email to foreman-user...@googlegroups.com.
> >> To post to this group, send email to forema...@googlegroups.com.
> >> Visit this group at https://groups.google.com/group/foreman-users.
> >> For more options, visit https://groups.google.com/d/optout.
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups
> > "Foreman users" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> an
> > email to foreman-user...@googlegroups.com .
> > To post to this group, send email to forema...@googlegroups.com
> .
> > Visit this group at https://groups.google.com/group/foreman-users.
> > For more options, visit https://groups.google.com/d/optout.
>
>
>
> --
> Later,
> Lukas @lzap Zapletal
>
We are tracking a ticket already to move Subnet image to Subnet page
rather than have it with a host, just matter of priorities. This was
rushed in a bit, I agree it's confusing. Feel free to move this
(sending a PR).
···
On Wed, Feb 22, 2017 at 4:24 AM, Andrew Schofield wrote:
> Well, it's tricky. I think there are a few options:
>
> - In the host, have a expandable sub-menu that has all the capsules /
> proxies listed?
> - In a hostgroup, have an option to download a boot disk (based on the
> content server settings?)
> - Actually have a boot disk download from the capsule / proxy settings
> themselves?
> - A combination of these?
>
> Certainly having it named subnet is just plain incorrect as has been
> mentioned before, there is *nothing* subnet specific - further in order to
> generate a subnet (capsule / proxy!) disk image, you *have* to have a TFTP
> capsule set - there is no technical reason for this though.
>
> Also, having to go to a host (and adjusting the subnet settings) just to get
> generic ISO(s) is rather less than optimal as there is nowhere else to get
> this! For example, we have 4 (key, default) ISO's. 1 for each region - they
> point to our regional load balancers. But to get these, we have to create a
> generic host. Adjust the hosts subnet (to get the right capsule in the
> subnet settings). Put the server into build mode. Download a subnet ISO.
> Delete the host. Neither obvious nor intuitive.
>
> From the top of my head, I can't remember the name they get, but I'd suggest
> the capsule / proxy image is named after, well, the capsule / proxy.
>
> On Tuesday, February 21, 2017 at 9:27:24 AM UTC-5, Jason B. Nance wrote:
>>
>> In the boot disk drop down I would most likely change subnet image to
>> content host image, though I can see how that is misleading since the image
>> isn't really based on the selected content host but the subnet
>> configuration. How about Capsule/Smart Proxy generic image instead?
>>
>> I would name the ISO the same way the generic image is, though, since it
>> is the same as the generic but pointed at the Capsule/Smart Proxy.
>>
>> j
>>
>>
>> ----- Original Message -----
>> From: "Lukas Zapletal"
>> To: "Foreman Users"
>> Cc: "Jason Nance"
>> Sent: Tuesday, February 21, 2017 1:33:32 AM
>> Subject: Re: [foreman-users] Generic Image For Capsule
>>
>> Ok, guys what label would you recommend then? My eyes are very biased
>> after these years spending on this codebase, help! :-)
>>
>> LZ
>>
>> On Thu, Feb 16, 2017 at 5:40 AM, Andrew Schofield >> wrote:
>> > I found that out the hard way a while back too Jason. This should be
>> > more
>> > visible on the UI somewhere!
>> >
>> > On Wednesday, February 15, 2017 at 9:58:09 AM UTC-5, Jason B. Nance >> > wrote:
>> >>
>> >> Ahh... this is much simpler than I though. The "subnet" image
>> >> basically
>> >> is the "generic" image just pointing to the Capsule/Smart Proxy. The
>> >> name
>> >> of the ISO was what was throwing me off. I thought there was something
>> >> subnet-specific in there, but after mounting and comparing I see
>> >> otherwise.
>> >>
>> >> j
>> >>
>> >>
>> >> ----- Original Message -----
>> >> From: "Foreman Users"
>> >> To: "Foreman Users"
>> >> Sent: Wednesday, February 15, 2017 8:44:18 AM
>> >> Subject: Re: [foreman-users] Generic Image For Capsule
>> >>
>> >> Hi Lukas,
>> >>
>> >> I already had the settings as you indicated but the generic image for
>> >> this
>> >> host is pointing to the primary Katello/Foreman server. I tried
>> >> cancelling
>> >> the build and clicking build again but results were same.
>> >>
>> >> Am I misunderstanding how this should work? Is the "generic" image
>> >> always
>> >> the same regardless of content host/location/subnet? Should I be using
>> >> the
>> >> subnet image instead?
>> >>
>> >> Thanks,
>> >>
>> >> j
>> >>
>> >>
>> >> ----- Original Message -----
>> >> From: "Lukas Zapletal"
>> >> To: "Foreman Users"
>> >> Sent: Wednesday, February 15, 2017 5:54:41 AM
>> >> Subject: Re: [foreman-users] Generic Image For Capsule
>> >>
>> >> Make sure both TFTP and Templates features are enabled on Subnet
>> >> proxy, then rebuild the host (hit Build button) and you should see
>> >> templated bootdisk.
>> >>
>> >> Can you please upvote this bug? I want to start counting on this,
>> >> other users often hit this.
>> >>
>> >> http://projects.theforeman.org/issues/17316
>> >>
>> >> LZ
>> >>
>> >> On Tue, Feb 14, 2017 at 3:59 PM, 'Jason B. Nance' via Foreman users >> >> wrote:
>> >> > Hello,
>> >> >
>> >> > After creating a new host I can download the generic image, which can
>> >> > be
>> >> > used to boot/install the host. This generic image points at the
>> >> > Katello/Foreman server itself. How do I download a generic image
>> >> > that
>> >> > points at a Capsule/Smart Proxy?
>> >> >
>> >> > I've tried creating a host and setting its content source to the
>> >> > Capsule
>> >> > but the generic boot disk still points at the primary Kat/TFM server.
>> >> >
>> >> > Thanks,
>> >> >
>> >> > j
>> >> >
>> >> > --
>> >> > You received this message because you are subscribed to the Google
>> >> > Groups "Foreman users" group.
>> >> > To unsubscribe from this group and stop receiving emails from it,
>> >> > send
>> >> > an email to foreman-user...@googlegroups.com.
>> >> > To post to this group, send email to forema...@googlegroups.com.
>> >> > Visit this group at https://groups.google.com/group/foreman-users.
>> >> > For more options, visit https://groups.google.com/d/optout.
>> >>
>> >>
>> >>
>> >> --
>> >> Later,
>> >> Lukas @lzap Zapletal
>> >>
>> >> --
>> >> You received this message because you are subscribed to the Google
>> >> Groups
>> >> "Foreman users" group.
>> >> To unsubscribe from this group and stop receiving emails from it, send
>> >> an
>> >> email to foreman-user...@googlegroups.com.
>> >> To post to this group, send email to forema...@googlegroups.com.
>> >> Visit this group at https://groups.google.com/group/foreman-users.
>> >> For more options, visit https://groups.google.com/d/optout.
>> >>
>> >> --
>> >> You received this message because you are subscribed to the Google
>> >> Groups
>> >> "Foreman users" group.
>> >> To unsubscribe from this group and stop receiving emails from it, send
>> >> an
>> >> email to foreman-user...@googlegroups.com.
>> >> To post to this group, send email to forema...@googlegroups.com.
>> >> Visit this group at https://groups.google.com/group/foreman-users.
>> >> For more options, visit https://groups.google.com/d/optout.
>> >
>> > --
>> > You received this message because you are subscribed to the Google
>> > Groups
>> > "Foreman users" group.
>> > To unsubscribe from this group and stop receiving emails from it, send
>> > an
>> > email to foreman-user...@googlegroups.com.
>> > To post to this group, send email to forema...@googlegroups.com.
>> > Visit this group at https://groups.google.com/group/foreman-users.
>> > For more options, visit https://groups.google.com/d/optout.
>>
>>
>>
>> --
>> Later,
>> Lukas @lzap Zapletal