Didn't know that the client has to be configured to send out the
facts…
Do you know where to do it?
I'll google meanwhile. Maybe I find some information.
···
On 28 Mrz., 17:35, Corey Osman wrote:
> Did you configure the puppet windows client to send reports?
>
> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> Sent from my iPhone
>
> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
>
>
>
>
>
>
> > Hi,
>
> > I'm using foreman with puppet. It works very good as far as we talk
> > about linux servers.
>
> > But now I've got some new Winows Servers which are also using puppet
> > (foreman).
>
> > I created those hosts in foreman and installed puppet on them.
> > everything is quiet good.
>
> > But can somebody here please tell me why I can't see any facts about
> > my windows servers?
>
> > For all my linux Servers I can see all the facts about the server by
> > selecting the host -> clicking the box facts on the right side under
> > details.
>
> > For my windows Servers it just shows:
>
> > Not entries found
>
> > Any idea?
>
> > --
> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > To post to this group, send email to foreman-users@googlegroups.com.
> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
I’m using foreman with puppet. It works very good as far as we talk
about linux servers.
But now I’ve got some new Winows Servers which are also using puppet
(foreman).
I created those hosts in foreman and installed puppet on them.
everything is quiet good.
But can somebody here please tell me why I can’t see any facts about
my windows servers?
For all my linux Servers I can see all the facts about the server by
selecting the host -> clicking the box facts on the right side under
details.
For my windows Servers it just shows:
Not entries found
Any idea?
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
But ckecking the $vardir/reports directory on the master I can't find
any reports from my windows clients… hmm.
Maybe I have to run puppet agent --test with any option like --reports
or something like that.
Does anybody know of there is an option to turn on reports by running
puppet?
···
On 29 Mrz., 08:11, Corey Osman wrote:
> I think its just reports=true.
>
> When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> Corey Osman
> co...@logicminds.biz
> 678-348-0582 (Pacific Time)
>
> Green IT and Datacenter Automation Specialist
>
> On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
>
>
>
>
>
>
> > Hi.
>
> > Didn't know that the client has to be configured to send out the
> > facts...
>
> > Do you know where to do it?
>
> > I'll google meanwhile. Maybe I find some information.
>
> > On 28 Mrz., 17:35, Corey Osman wrote:
> >> Did you configure the puppet windows client to send reports?
>
> >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> >> Sent from my iPhone
>
> >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> >>> Hi,
>
> >>> I'm using foreman with puppet. It works very good as far as we talk
> >>> about linux servers.
>
> >>> But now I've got some new Winows Servers which are also using puppet
> >>> (foreman).
>
> >>> I created those hosts in foreman and installed puppet on them.
> >>> everything is quiet good.
>
> >>> But can somebody here please tell me why I can't see any facts about
> >>> my windows servers?
>
> >>> For all my linux Servers I can see all the facts about the server by
> >>> selecting the host -> clicking the box facts on the right side under
> >>> details.
>
> >>> For my windows Servers it just shows:
>
> >>> Not entries found
>
> >>> Any idea?
>
> >>> --
> >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >>> To post to this group, send email to foreman-users@googlegroups.com.
> >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > To post to this group, send email to foreman-users@googlegroups.com.
> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
But still no reports for my client…
That's strange. I'll google for some more information about that.
···
On 29 Mrz., 08:40, Jay Ze wrote:
> OK.
>
> I checked my puppet.conf.
>
> report = true
>
> is set correctly..
>
> But ckecking the $vardir/reports directory on the master I can't find
> any reports from my windows clients.... hmm.
>
> Maybe I have to run puppet agent --test with any option like --reports
> or something like that.
>
> Does anybody know of there is an option to turn on reports by running
> puppet?
>
> On 29 Mrz., 08:11, Corey Osman wrote:
>
>
>
>
>
>
>
> > I think its just reports=true.
>
> > When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> > Corey Osman
> > co...@logicminds.biz
> > 678-348-0582 (Pacific Time)
>
> > Green IT and Datacenter Automation Specialist
>
> > On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
> > > Hi.
>
> > > Didn't know that the client has to be configured to send out the
> > > facts...
>
> > > Do you know where to do it?
>
> > > I'll google meanwhile. Maybe I find some information.
>
> > > On 28 Mrz., 17:35, Corey Osman wrote:
> > >> Did you configure the puppet windows client to send reports?
>
> > >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> > >> Sent from my iPhone
>
> > >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> > >>> Hi,
>
> > >>> I'm using foreman with puppet. It works very good as far as we talk
> > >>> about linux servers.
>
> > >>> But now I've got some new Winows Servers which are also using puppet
> > >>> (foreman).
>
> > >>> I created those hosts in foreman and installed puppet on them.
> > >>> everything is quiet good.
>
> > >>> But can somebody here please tell me why I can't see any facts about
> > >>> my windows servers?
>
> > >>> For all my linux Servers I can see all the facts about the server by
> > >>> selecting the host -> clicking the box facts on the right side under
> > >>> details.
>
> > >>> For my windows Servers it just shows:
>
> > >>> Not entries found
>
> > >>> Any idea?
>
> > >>> --
> > >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > >>> To post to this group, send email to foreman-users@googlegroups.com.
> > >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > > --
> > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > > To post to this group, send email to foreman-users@googlegroups.com.
> > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
I finally found the reports for the windows servers under the reports
section in foreman.
But those reports aren't shown under the details -> facts
···
On 29 Mrz., 09:02, Jay Ze wrote:
> OK I found out that
>
> puppet agent --test --report
>
> seems to do something, although it's not listed as correct option for
> puppet agent (http://docs.puppetlabs.com/man/agent.html)
>
> But still no reports for my client...
> That's strange. I'll google for some more information about that.
>
> On 29 Mrz., 08:40, Jay Ze wrote:
>
>
>
>
>
>
>
> > OK.
>
> > I checked my puppet.conf.
>
> > report = true
>
> > is set correctly..
>
> > But ckecking the $vardir/reports directory on the master I can't find
> > any reports from my windows clients.... hmm.
>
> > Maybe I have to run puppet agent --test with any option like --reports
> > or something like that.
>
> > Does anybody know of there is an option to turn on reports by running
> > puppet?
>
> > On 29 Mrz., 08:11, Corey Osman wrote:
>
> > > I think its just reports=true.
>
> > > When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> > > Corey Osman
> > > co...@logicminds.biz
> > > 678-348-0582 (Pacific Time)
>
> > > Green IT and Datacenter Automation Specialist
>
> > > On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
> > > > Hi.
>
> > > > Didn't know that the client has to be configured to send out the
> > > > facts...
>
> > > > Do you know where to do it?
>
> > > > I'll google meanwhile. Maybe I find some information.
>
> > > > On 28 Mrz., 17:35, Corey Osman wrote:
> > > >> Did you configure the puppet windows client to send reports?
>
> > > >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> > > >> Sent from my iPhone
>
> > > >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> > > >>> Hi,
>
> > > >>> I'm using foreman with puppet. It works very good as far as we talk
> > > >>> about linux servers.
>
> > > >>> But now I've got some new Winows Servers which are also using puppet
> > > >>> (foreman).
>
> > > >>> I created those hosts in foreman and installed puppet on them.
> > > >>> everything is quiet good.
>
> > > >>> But can somebody here please tell me why I can't see any facts about
> > > >>> my windows servers?
>
> > > >>> For all my linux Servers I can see all the facts about the server by
> > > >>> selecting the host -> clicking the box facts on the right side under
> > > >>> details.
>
> > > >>> For my windows Servers it just shows:
>
> > > >>> Not entries found
>
> > > >>> Any idea?
>
> > > >>> --
> > > >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > > >>> To post to this group, send email to foreman-users@googlegroups.com.
> > > >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > > >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > > > --
> > > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > > > To post to this group, send email to foreman-users@googlegroups.com.
> > > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
I’m using foreman with puppet. It works very good as far as we talk
about linux servers.
But now I’ve got some new Winows Servers which are also using puppet
(foreman).
I created those hosts in foreman and installed puppet on them.
everything is quiet good.
But can somebody here please tell me why I can’t see any facts about
my windows servers?
For all my linux Servers I can see all the facts about the server by
selecting the host -> clicking the box facts on the right side under
details.
For my windows Servers it just shows:
Not entries found
Any idea?
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
···
On 29 Mrz., 10:45, Corey Osman wrote:
> Did you say you were running storeconfigs?
>
> Corey Osman
> co...@logicminds.biz
> 678-348-0582 (Pacific Time)
>
> Green IT and Datacenter Automation Specialist
>
> On Mar 29, 2012, at 12:02 AM, Jay Ze wrote:
>
>
>
>
>
>
>
> > OK I found out that
>
> > puppet agent --test --report
>
> > seems to do something, although it's not listed as correct option for
> > puppet agent (http://docs.puppetlabs.com/man/agent.html)
>
> > But still no reports for my client...
> > That's strange. I'll google for some more information about that.
>
> > On 29 Mrz., 08:40, Jay Ze wrote:
> >> OK.
>
> >> I checked my puppet.conf.
>
> >> report = true
>
> >> is set correctly..
>
> >> But ckecking the $vardir/reports directory on the master I can't find
> >> any reports from my windows clients.... hmm.
>
> >> Maybe I have to run puppet agent --test with any option like --reports
> >> or something like that.
>
> >> Does anybody know of there is an option to turn on reports by running
> >> puppet?
>
> >> On 29 Mrz., 08:11, Corey Osman wrote:
>
> >>> I think its just reports=true.
>
> >>> When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> >>> Corey Osman
> >>> co...@logicminds.biz
> >>> 678-348-0582 (Pacific Time)
>
> >>> Green IT and Datacenter Automation Specialist
>
> >>> On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
> >>>> Hi.
>
> >>>> Didn't know that the client has to be configured to send out the
> >>>> facts...
>
> >>>> Do you know where to do it?
>
> >>>> I'll google meanwhile. Maybe I find some information.
>
> >>>> On 28 Mrz., 17:35, Corey Osman wrote:
> >>>>> Did you configure the puppet windows client to send reports?
>
> >>>>> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> >>>>> Sent from my iPhone
>
> >>>>> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> >>>>>> Hi,
>
> >>>>>> I'm using foreman with puppet. It works very good as far as we talk
> >>>>>> about linux servers.
>
> >>>>>> But now I've got some new Winows Servers which are also using puppet
> >>>>>> (foreman).
>
> >>>>>> I created those hosts in foreman and installed puppet on them.
> >>>>>> everything is quiet good.
>
> >>>>>> But can somebody here please tell me why I can't see any facts about
> >>>>>> my windows servers?
>
> >>>>>> For all my linux Servers I can see all the facts about the server by
> >>>>>> selecting the host -> clicking the box facts on the right side under
> >>>>>> details.
>
> >>>>>> For my windows Servers it just shows:
>
> >>>>>> Not entries found
>
> >>>>>> Any idea?
>
> >>>>>> --
> >>>>>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >>>>>> To post to this group, send email to foreman-users@googlegroups.com.
> >>>>>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >>>>>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> >>>> --
> >>>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >>>> To post to this group, send email to foreman-users@googlegroups.com.
> >>>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >>>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > To post to this group, send email to foreman-users@googlegroups.com.
> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
> I finally found the reports for the windows servers under the reports
> section in foreman.
I guess reports are working, but are you uploading your facts?
(normally this is done via the ENC script).
if you do, can you double check the facts are on your master?
(normally /var/lib/puppet/yaml/facts)
Ohad
···
On Thu, Mar 29, 2012 at 9:33 AM, Jay Ze wrote:
>
> But those reports aren't shown under the details -> facts
>
> On 29 Mrz., 09:02, Jay Ze wrote:
>> OK I found out that
>>
>> puppet agent --test --report
>>
>> seems to do something, although it's not listed as correct option for
>> puppet agent (http://docs.puppetlabs.com/man/agent.html)
>>
>> But still no reports for my client...
>> That's strange. I'll google for some more information about that.
>>
>> On 29 Mrz., 08:40, Jay Ze wrote:
>>
>>
>>
>>
>>
>>
>>
>> > OK.
>>
>> > I checked my puppet.conf.
>>
>> > report = true
>>
>> > is set correctly..
>>
>> > But ckecking the $vardir/reports directory on the master I can't find
>> > any reports from my windows clients.... hmm.
>>
>> > Maybe I have to run puppet agent --test with any option like --reports
>> > or something like that.
>>
>> > Does anybody know of there is an option to turn on reports by running
>> > puppet?
>>
>> > On 29 Mrz., 08:11, Corey Osman wrote:
>>
>> > > I think its just reports=true.
>>
>> > > When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>>
>> > > Corey Osman
>> > > co...@logicminds.biz
>> > > 678-348-0582 (Pacific Time)
>>
>> > > Green IT and Datacenter Automation Specialist
>>
>> > > On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>>
>> > > > Hi.
>>
>> > > > Didn't know that the client has to be configured to send out the
>> > > > facts...
>>
>> > > > Do you know where to do it?
>>
>> > > > I'll google meanwhile. Maybe I find some information.
>>
>> > > > On 28 Mrz., 17:35, Corey Osman wrote:
>> > > >> Did you configure the puppet windows client to send reports?
>>
>> > > >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>>
>> > > >> Sent from my iPhone
>>
>> > > >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>>
>> > > >>> Hi,
>>
>> > > >>> I'm using foreman with puppet. It works very good as far as we talk
>> > > >>> about linux servers.
>>
>> > > >>> But now I've got some new Winows Servers which are also using puppet
>> > > >>> (foreman).
>>
>> > > >>> I created those hosts in foreman and installed puppet on them.
>> > > >>> everything is quiet good.
>>
>> > > >>> But can somebody here please tell me why I can't see any facts about
>> > > >>> my windows servers?
>>
>> > > >>> For all my linux Servers I can see all the facts about the server by
>> > > >>> selecting the host -> clicking the box facts on the right side under
>> > > >>> details.
>>
>> > > >>> For my windows Servers it just shows:
>>
>> > > >>> Not entries found
>>
>> > > >>> Any idea?
>>
>> > > >>> --
>> > > >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> > > >>> To post to this group, send email to foreman-users@googlegroups.com.
>> > > >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> > > >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>>
>> > > > --
>> > > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> > > > To post to this group, send email to foreman-users@googlegroups.com.
>> > > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> > > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> To post to this group, send email to foreman-users@googlegroups.com.
> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/foreman-users?hl=en.
>
and I found my windows servers… So the vclients are uploading the
facts as they should…
···
On 29 Mrz., 09:35, Ohad Levy wrote:
> On Thu, Mar 29, 2012 at 9:33 AM, Jay Ze wrote:
> > I finally found the reports for the windows servers under the reports
> > section in foreman.
>
> I guess reports are working, but are you uploading your facts?
> (normally this is done via the ENC script).
> if you do, can you double check the facts are on your master?
> (normally /var/lib/puppet/yaml/facts)
>
> Ohad
>
>
>
>
>
>
>
>
>
> > But those reports aren't shown under the details -> facts
>
> > On 29 Mrz., 09:02, Jay Ze wrote:
> >> OK I found out that
>
> >> puppet agent --test --report
>
> >> seems to do something, although it's not listed as correct option for
> >> puppet agent (http://docs.puppetlabs.com/man/agent.html)
>
> >> But still no reports for my client...
> >> That's strange. I'll google for some more information about that.
>
> >> On 29 Mrz., 08:40, Jay Ze wrote:
>
> >> > OK.
>
> >> > I checked my puppet.conf.
>
> >> > report = true
>
> >> > is set correctly..
>
> >> > But ckecking the $vardir/reports directory on the master I can't find
> >> > any reports from my windows clients.... hmm.
>
> >> > Maybe I have to run puppet agent --test with any option like --reports
> >> > or something like that.
>
> >> > Does anybody know of there is an option to turn on reports by running
> >> > puppet?
>
> >> > On 29 Mrz., 08:11, Corey Osman wrote:
>
> >> > > I think its just reports=true.
>
> >> > > When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> >> > > Corey Osman
> >> > > co...@logicminds.biz
> >> > > 678-348-0582 (Pacific Time)
>
> >> > > Green IT and Datacenter Automation Specialist
>
> >> > > On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
> >> > > > Hi.
>
> >> > > > Didn't know that the client has to be configured to send out the
> >> > > > facts...
>
> >> > > > Do you know where to do it?
>
> >> > > > I'll google meanwhile. Maybe I find some information.
>
> >> > > > On 28 Mrz., 17:35, Corey Osman wrote:
> >> > > >> Did you configure the puppet windows client to send reports?
>
> >> > > >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> >> > > >> Sent from my iPhone
>
> >> > > >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> >> > > >>> Hi,
>
> >> > > >>> I'm using foreman with puppet. It works very good as far as we talk
> >> > > >>> about linux servers.
>
> >> > > >>> But now I've got some new Winows Servers which are also using puppet
> >> > > >>> (foreman).
>
> >> > > >>> I created those hosts in foreman and installed puppet on them.
> >> > > >>> everything is quiet good.
>
> >> > > >>> But can somebody here please tell me why I can't see any facts about
> >> > > >>> my windows servers?
>
> >> > > >>> For all my linux Servers I can see all the facts about the server by
> >> > > >>> selecting the host -> clicking the box facts on the right side under
> >> > > >>> details.
>
> >> > > >>> For my windows Servers it just shows:
>
> >> > > >>> Not entries found
>
> >> > > >>> Any idea?
>
> >> > > >>> --
> >> > > >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >> > > >>> To post to this group, send email to foreman-users@googlegroups.com.
> >> > > >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >> > > >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> >> > > > --
> >> > > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >> > > > To post to this group, send email to foreman-users@googlegroups.com.
> >> > > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >> > > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > To post to this group, send email to foreman-users@googlegroups.com.
> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
···
On 29 Mrz., 10:47, Jay Ze wrote:
> No we disabled storeconfigs.
>
> On 29 Mrz., 10:45, Corey Osman wrote:
>
>
>
>
>
>
>
> > Did you say you were running storeconfigs?
>
> > Corey Osman
> > co...@logicminds.biz
> > 678-348-0582 (Pacific Time)
>
> > Green IT and Datacenter Automation Specialist
>
> > On Mar 29, 2012, at 12:02 AM, Jay Ze wrote:
>
> > > OK I found out that
>
> > > puppet agent --test --report
>
> > > seems to do something, although it's not listed as correct option for
> > > puppet agent (http://docs.puppetlabs.com/man/agent.html)
>
> > > But still no reports for my client...
> > > That's strange. I'll google for some more information about that.
>
> > > On 29 Mrz., 08:40, Jay Ze wrote:
> > >> OK.
>
> > >> I checked my puppet.conf.
>
> > >> report = true
>
> > >> is set correctly..
>
> > >> But ckecking the $vardir/reports directory on the master I can't find
> > >> any reports from my windows clients.... hmm.
>
> > >> Maybe I have to run puppet agent --test with any option like --reports
> > >> or something like that.
>
> > >> Does anybody know of there is an option to turn on reports by running
> > >> puppet?
>
> > >> On 29 Mrz., 08:11, Corey Osman wrote:
>
> > >>> I think its just reports=true.
>
> > >>> When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> > >>> Corey Osman
> > >>> co...@logicminds.biz
> > >>> 678-348-0582 (Pacific Time)
>
> > >>> Green IT and Datacenter Automation Specialist
>
> > >>> On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
> > >>>> Hi.
>
> > >>>> Didn't know that the client has to be configured to send out the
> > >>>> facts...
>
> > >>>> Do you know where to do it?
>
> > >>>> I'll google meanwhile. Maybe I find some information.
>
> > >>>> On 28 Mrz., 17:35, Corey Osman wrote:
> > >>>>> Did you configure the puppet windows client to send reports?
>
> > >>>>> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> > >>>>> Sent from my iPhone
>
> > >>>>> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> > >>>>>> Hi,
>
> > >>>>>> I'm using foreman with puppet. It works very good as far as we talk
> > >>>>>> about linux servers.
>
> > >>>>>> But now I've got some new Winows Servers which are also using puppet
> > >>>>>> (foreman).
>
> > >>>>>> I created those hosts in foreman and installed puppet on them.
> > >>>>>> everything is quiet good.
>
> > >>>>>> But can somebody here please tell me why I can't see any facts about
> > >>>>>> my windows servers?
>
> > >>>>>> For all my linux Servers I can see all the facts about the server by
> > >>>>>> selecting the host -> clicking the box facts on the right side under
> > >>>>>> details.
>
> > >>>>>> For my windows Servers it just shows:
>
> > >>>>>> Not entries found
>
> > >>>>>> Any idea?
>
> > >>>>>> --
> > >>>>>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > >>>>>> To post to this group, send email to foreman-users@googlegroups.com.
> > >>>>>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > >>>>>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > >>>> --
> > >>>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > >>>> To post to this group, send email to foreman-users@googlegroups.com.
> > >>>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > >>>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > > --
> > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > > To post to this group, send email to foreman-users@googlegroups.com.
> > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
> Hi,
>
> I checked /var/lib/puppet/yaml/facts
>
> and I found my windows servers… So the vclients are uploading the
> facts as they should…
so i guess you are not importing the facts to foreman correctly…
double check that your enc script, or a cron job that uploads the
facts…
cheers,
Ohad
···
On Thu, Mar 29, 2012 at 9:44 AM, Jay Ze wrote:
>
> On 29 Mrz., 09:35, Ohad Levy wrote:
>> On Thu, Mar 29, 2012 at 9:33 AM, Jay Ze wrote:
>> > I finally found the reports for the windows servers under the reports
>> > section in foreman.
>>
>> I guess reports are working, but are you uploading your facts?
>> (normally this is done via the ENC script).
>> if you do, can you double check the facts are on your master?
>> (normally /var/lib/puppet/yaml/facts)
>>
>> Ohad
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> > But those reports aren't shown under the details -> facts
>>
>> > On 29 Mrz., 09:02, Jay Ze wrote:
>> >> OK I found out that
>>
>> >> puppet agent --test --report
>>
>> >> seems to do something, although it's not listed as correct option for
>> >> puppet agent (http://docs.puppetlabs.com/man/agent.html)
>>
>> >> But still no reports for my client...
>> >> That's strange. I'll google for some more information about that.
>>
>> >> On 29 Mrz., 08:40, Jay Ze wrote:
>>
>> >> > OK.
>>
>> >> > I checked my puppet.conf.
>>
>> >> > report = true
>>
>> >> > is set correctly..
>>
>> >> > But ckecking the $vardir/reports directory on the master I can't find
>> >> > any reports from my windows clients.... hmm.
>>
>> >> > Maybe I have to run puppet agent --test with any option like --reports
>> >> > or something like that.
>>
>> >> > Does anybody know of there is an option to turn on reports by running
>> >> > puppet?
>>
>> >> > On 29 Mrz., 08:11, Corey Osman wrote:
>>
>> >> > > I think its just reports=true.
>>
>> >> > > When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>>
>> >> > > Corey Osman
>> >> > > co...@logicminds.biz
>> >> > > 678-348-0582 (Pacific Time)
>>
>> >> > > Green IT and Datacenter Automation Specialist
>>
>> >> > > On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>>
>> >> > > > Hi.
>>
>> >> > > > Didn't know that the client has to be configured to send out the
>> >> > > > facts...
>>
>> >> > > > Do you know where to do it?
>>
>> >> > > > I'll google meanwhile. Maybe I find some information.
>>
>> >> > > > On 28 Mrz., 17:35, Corey Osman wrote:
>> >> > > >> Did you configure the puppet windows client to send reports?
>>
>> >> > > >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>>
>> >> > > >> Sent from my iPhone
>>
>> >> > > >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>>
>> >> > > >>> Hi,
>>
>> >> > > >>> I'm using foreman with puppet. It works very good as far as we talk
>> >> > > >>> about linux servers.
>>
>> >> > > >>> But now I've got some new Winows Servers which are also using puppet
>> >> > > >>> (foreman).
>>
>> >> > > >>> I created those hosts in foreman and installed puppet on them.
>> >> > > >>> everything is quiet good.
>>
>> >> > > >>> But can somebody here please tell me why I can't see any facts about
>> >> > > >>> my windows servers?
>>
>> >> > > >>> For all my linux Servers I can see all the facts about the server by
>> >> > > >>> selecting the host -> clicking the box facts on the right side under
>> >> > > >>> details.
>>
>> >> > > >>> For my windows Servers it just shows:
>>
>> >> > > >>> Not entries found
>>
>> >> > > >>> Any idea?
>>
>> >> > > >>> --
>> >> > > >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> >> > > >>> To post to this group, send email to foreman-users@googlegroups.com.
>> >> > > >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> >> > > >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>>
>> >> > > > --
>> >> > > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> >> > > > To post to this group, send email to foreman-users@googlegroups.com.
>> >> > > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> >> > > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>>
>> > --
>> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> > To post to this group, send email to foreman-users@googlegroups.com.
>> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> To post to this group, send email to foreman-users@googlegroups.com.
> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/foreman-users?hl=en.
>
As you can see both methods say that they imported, but they are still
not showed as facts under details for a host.
···
On 29 Mrz., 09:51, Ohad Levy wrote:
> On Thu, Mar 29, 2012 at 9:44 AM, Jay Ze wrote:
> > Hi,
>
> > I checked /var/lib/puppet/yaml/facts
>
> > and I found my windows servers... So the vclients are uploading the
> > facts as they should...
>
> so i guess you are not importing the facts to foreman correctly...
> double check that your enc script, or a cron job that uploads the
> facts...
>
> cheers,
> Ohad
>
>
>
>
>
>
>
>
>
> > On 29 Mrz., 09:35, Ohad Levy wrote:
> >> On Thu, Mar 29, 2012 at 9:33 AM, Jay Ze wrote:
> >> > I finally found the reports for the windows servers under the reports
> >> > section in foreman.
>
> >> I guess reports are working, but are you uploading your facts?
> >> (normally this is done via the ENC script).
> >> if you do, can you double check the facts are on your master?
> >> (normally /var/lib/puppet/yaml/facts)
>
> >> Ohad
>
> >> > But those reports aren't shown under the details -> facts
>
> >> > On 29 Mrz., 09:02, Jay Ze wrote:
> >> >> OK I found out that
>
> >> >> puppet agent --test --report
>
> >> >> seems to do something, although it's not listed as correct option for
> >> >> puppet agent (http://docs.puppetlabs.com/man/agent.html)
>
> >> >> But still no reports for my client...
> >> >> That's strange. I'll google for some more information about that.
>
> >> >> On 29 Mrz., 08:40, Jay Ze wrote:
>
> >> >> > OK.
>
> >> >> > I checked my puppet.conf.
>
> >> >> > report = true
>
> >> >> > is set correctly..
>
> >> >> > But ckecking the $vardir/reports directory on the master I can't find
> >> >> > any reports from my windows clients.... hmm.
>
> >> >> > Maybe I have to run puppet agent --test with any option like --reports
> >> >> > or something like that.
>
> >> >> > Does anybody know of there is an option to turn on reports by running
> >> >> > puppet?
>
> >> >> > On 29 Mrz., 08:11, Corey Osman wrote:
>
> >> >> > > I think its just reports=true.
>
> >> >> > > When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> >> >> > > Corey Osman
> >> >> > > co...@logicminds.biz
> >> >> > > 678-348-0582 (Pacific Time)
>
> >> >> > > Green IT and Datacenter Automation Specialist
>
> >> >> > > On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
> >> >> > > > Hi.
>
> >> >> > > > Didn't know that the client has to be configured to send out the
> >> >> > > > facts...
>
> >> >> > > > Do you know where to do it?
>
> >> >> > > > I'll google meanwhile. Maybe I find some information.
>
> >> >> > > > On 28 Mrz., 17:35, Corey Osman wrote:
> >> >> > > >> Did you configure the puppet windows client to send reports?
>
> >> >> > > >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> >> >> > > >> Sent from my iPhone
>
> >> >> > > >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> >> >> > > >>> Hi,
>
> >> >> > > >>> I'm using foreman with puppet. It works very good as far as we talk
> >> >> > > >>> about linux servers.
>
> >> >> > > >>> But now I've got some new Winows Servers which are also using puppet
> >> >> > > >>> (foreman).
>
> >> >> > > >>> I created those hosts in foreman and installed puppet on them.
> >> >> > > >>> everything is quiet good.
>
> >> >> > > >>> But can somebody here please tell me why I can't see any facts about
> >> >> > > >>> my windows servers?
>
> >> >> > > >>> For all my linux Servers I can see all the facts about the server by
> >> >> > > >>> selecting the host -> clicking the box facts on the right side under
> >> >> > > >>> details.
>
> >> >> > > >>> For my windows Servers it just shows:
>
> >> >> > > >>> Not entries found
>
> >> >> > > >>> Any idea?
>
> >> >> > > >>> --
> >> >> > > >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >> >> > > >>> To post to this group, send email to foreman-users@googlegroups.com.
> >> >> > > >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >> >> > > >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> >> >> > > > --
> >> >> > > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >> >> > > > To post to this group, send email to foreman-users@googlegroups.com.
> >> >> > > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >> >> > > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> >> > --
> >> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >> > To post to this group, send email to foreman-users@googlegroups.com.
> >> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > To post to this group, send email to foreman-users@googlegroups.com.
> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
I forgot to thank you all for your quick and helpful answers so
far
···
On 29 Mrz., 10:26, Jay Ze wrote:
> Hi,
>
> I use the standard script that comes with puppet.
> I tried to import the facts with: (as described inhttp://theforeman.org/projects/foreman/wiki/Puppet_Facts)
>
> rake puppet:import:hosts_and_facts dir=/var/lib/puppet/yaml/facts
> RAILS_ENV=production
>
> --> Output:
>
> [root@foreman foreman]# rake puppet:import:hosts_and_facts dir=/var/
> lib/puppet/yaml/facts RAILS_ENV=production
> /usr/share/foreman/vendor/ruby/1.8/gems/ruby_parser-2.3.1/lib/
> ruby_parser_extras.rb:10: warning: already initialized constant
> ENC_NONE
> /usr/share/foreman/vendor/ruby/1.8/gems/ruby_parser-2.3.1/lib/
> ruby_parser_extras.rb:11: warning: already initialized constant
> ENC_EUC
> /usr/share/foreman/vendor/ruby/1.8/gems/ruby_parser-2.3.1/lib/
> ruby_parser_extras.rb:12: warning: already initialized constant
> ENC_SJIS
> /usr/share/foreman/vendor/ruby/1.8/gems/ruby_parser-2.3.1/lib/
> ruby_parser_extras.rb:13: warning: already initialized constant
> ENC_UTF8
> Importing from /var/lib/puppet/yaml/facts
> Importing windowsserver.domain.test.com
> Importing linuxserver.domain.test.com
>
> and the script from
>
> https://github.com/theforeman/puppet-foreman/blob/283619064fbde027523...
>
> As you can see both methods say that they imported, but they are still
> not showed as facts under details for a host.
>
> On 29 Mrz., 09:51, Ohad Levy wrote:
>
>
>
>
>
>
>
> > On Thu, Mar 29, 2012 at 9:44 AM, Jay Ze wrote:
> > > Hi,
>
> > > I checked /var/lib/puppet/yaml/facts
>
> > > and I found my windows servers... So the vclients are uploading the
> > > facts as they should...
>
> > so i guess you are not importing the facts to foreman correctly...
> > double check that your enc script, or a cron job that uploads the
> > facts...
>
> > cheers,
> > Ohad
>
> > > On 29 Mrz., 09:35, Ohad Levy wrote:
> > >> On Thu, Mar 29, 2012 at 9:33 AM, Jay Ze wrote:
> > >> > I finally found the reports for the windows servers under the reports
> > >> > section in foreman.
>
> > >> I guess reports are working, but are you uploading your facts?
> > >> (normally this is done via the ENC script).
> > >> if you do, can you double check the facts are on your master?
> > >> (normally /var/lib/puppet/yaml/facts)
>
> > >> Ohad
>
> > >> > But those reports aren't shown under the details -> facts
>
> > >> > On 29 Mrz., 09:02, Jay Ze wrote:
> > >> >> OK I found out that
>
> > >> >> puppet agent --test --report
>
> > >> >> seems to do something, although it's not listed as correct option for
> > >> >> puppet agent (http://docs.puppetlabs.com/man/agent.html)
>
> > >> >> But still no reports for my client...
> > >> >> That's strange. I'll google for some more information about that.
>
> > >> >> On 29 Mrz., 08:40, Jay Ze wrote:
>
> > >> >> > OK.
>
> > >> >> > I checked my puppet.conf.
>
> > >> >> > report = true
>
> > >> >> > is set correctly..
>
> > >> >> > But ckecking the $vardir/reports directory on the master I can't find
> > >> >> > any reports from my windows clients.... hmm.
>
> > >> >> > Maybe I have to run puppet agent --test with any option like --reports
> > >> >> > or something like that.
>
> > >> >> > Does anybody know of there is an option to turn on reports by running
> > >> >> > puppet?
>
> > >> >> > On 29 Mrz., 08:11, Corey Osman wrote:
>
> > >> >> > > I think its just reports=true.
>
> > >> >> > > When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> > >> >> > > Corey Osman
> > >> >> > > co...@logicminds.biz
> > >> >> > > 678-348-0582 (Pacific Time)
>
> > >> >> > > Green IT and Datacenter Automation Specialist
>
> > >> >> > > On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
> > >> >> > > > Hi.
>
> > >> >> > > > Didn't know that the client has to be configured to send out the
> > >> >> > > > facts...
>
> > >> >> > > > Do you know where to do it?
>
> > >> >> > > > I'll google meanwhile. Maybe I find some information.
>
> > >> >> > > > On 28 Mrz., 17:35, Corey Osman wrote:
> > >> >> > > >> Did you configure the puppet windows client to send reports?
>
> > >> >> > > >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> > >> >> > > >> Sent from my iPhone
>
> > >> >> > > >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> > >> >> > > >>> Hi,
>
> > >> >> > > >>> I'm using foreman with puppet. It works very good as far as we talk
> > >> >> > > >>> about linux servers.
>
> > >> >> > > >>> But now I've got some new Winows Servers which are also using puppet
> > >> >> > > >>> (foreman).
>
> > >> >> > > >>> I created those hosts in foreman and installed puppet on them.
> > >> >> > > >>> everything is quiet good.
>
> > >> >> > > >>> But can somebody here please tell me why I can't see any facts about
> > >> >> > > >>> my windows servers?
>
> > >> >> > > >>> For all my linux Servers I can see all the facts about the server by
> > >> >> > > >>> selecting the host -> clicking the box facts on the right side under
> > >> >> > > >>> details.
>
> > >> >> > > >>> For my windows Servers it just shows:
>
> > >> >> > > >>> Not entries found
>
> > >> >> > > >>> Any idea?
>
> > >> >> > > >>> --
> > >> >> > > >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > >> >> > > >>> To post to this group, send email to foreman-users@googlegroups.com.
> > >> >> > > >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > >> >> > > >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > >> >> > > > --
> > >> >> > > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > >> >> > > > To post to this group, send email to foreman-users@googlegroups.com.
> > >> >> > > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > >> >> > > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > >> > --
> > >> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > >> > To post to this group, send email to foreman-users@googlegroups.com.
> > >> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > >> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > > --
> > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > > To post to this group, send email to foreman-users@googlegroups.com.
> > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
I use the standard script that comes with puppet.
I tried to import the facts with: (as described inhttp://theforeman.org/projects/foreman/wiki/Puppet_Facts)
I finally found the reports for the windows servers under the reports
section in foreman.
I guess reports are working, but are you uploading your facts?
(normally this is done via the ENC script).
if you do, can you double check the facts are on your master?
(normally /var/lib/puppet/yaml/facts)
Ohad
But those reports aren’t shown under the details -> facts
I’m using foreman with puppet. It works very good as far as we talk
about linux servers.
But now I’ve got some new Winows Servers which are also using puppet
(foreman).
I created those hosts in foreman and installed puppet on them.
everything is quiet good.
But can somebody here please tell me why I can’t see any facts about
my windows servers?
For all my linux Servers I can see all the facts about the server by
selecting the host -> clicking the box facts on the right side under
details.
For my windows Servers it just shows:
Not entries found
Any idea?
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
> Hi,
>
>
> I use the standard script that comes with puppet.
> I tried to import the facts with: (as described in
> Puppet Facts - Foreman)
>
> rake puppet:import:hosts_and_facts dir=/var/lib/puppet/yaml/facts
> RAILS_ENV=production
>
> --> Output:
>
> [root@foreman foreman]# rake puppet:import:hosts_and_facts dir=/var/
> lib/puppet/yaml/facts RAILS_ENV=production
> /usr/share/foreman/vendor/ruby/1.8/gems/ruby_parser-2.3.1/lib/
> ruby_parser_extras.rb:10: warning: already initialized constant
> ENC_NONE
> /usr/share/foreman/vendor/ruby/1.8/gems/ruby_parser-2.3.1/lib/
> ruby_parser_extras.rb:11: warning: already initialized constant
> ENC_EUC
> /usr/share/foreman/vendor/ruby/1.8/gems/ruby_parser-2.3.1/lib/
> ruby_parser_extras.rb:12: warning: already initialized constant
> ENC_SJIS
> /usr/share/foreman/vendor/ruby/1.8/gems/ruby_parser-2.3.1/lib/
> ruby_parser_extras.rb:13: warning: already initialized constant
> ENC_UTF8
> Importing from /var/lib/puppet/yaml/facts
> Importing windowsserver.domain.test.com
> Importing linuxserver.domain.test.com
>
can you look at the foreman server at the same time? it could be that
we are having some issues processing them.
also, do the facts exists under the facts tab?
···
On Thu, Mar 29, 2012 at 10:26 AM, Jay Ze wrote:
>
>
> and the script from
>
> https://github.com/theforeman/puppet-foreman/blob/283619064fbde0275235535b19c53da249357035/files/push_facts.rb
>
>
> As you can see both methods say that they imported, but they are still
> not showed as facts under details for a host.
>
> On 29 Mrz., 09:51, Ohad Levy wrote:
>> On Thu, Mar 29, 2012 at 9:44 AM, Jay Ze wrote:
>> > Hi,
>>
>> > I checked /var/lib/puppet/yaml/facts
>>
>> > and I found my windows servers... So the vclients are uploading the
>> > facts as they should...
>>
>> so i guess you are not importing the facts to foreman correctly...
>> double check that your enc script, or a cron job that uploads the
>> facts...
>>
>> cheers,
>> Ohad
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> > On 29 Mrz., 09:35, Ohad Levy wrote:
>> >> On Thu, Mar 29, 2012 at 9:33 AM, Jay Ze wrote:
>> >> > I finally found the reports for the windows servers under the reports
>> >> > section in foreman.
>>
>> >> I guess reports are working, but are you uploading your facts?
>> >> (normally this is done via the ENC script).
>> >> if you do, can you double check the facts are on your master?
>> >> (normally /var/lib/puppet/yaml/facts)
>>
>> >> Ohad
>>
>> >> > But those reports aren't shown under the details -> facts
>>
>> >> > On 29 Mrz., 09:02, Jay Ze wrote:
>> >> >> OK I found out that
>>
>> >> >> puppet agent --test --report
>>
>> >> >> seems to do something, although it's not listed as correct option for
>> >> >> puppet agent (http://docs.puppetlabs.com/man/agent.html)
>>
>> >> >> But still no reports for my client...
>> >> >> That's strange. I'll google for some more information about that.
>>
>> >> >> On 29 Mrz., 08:40, Jay Ze wrote:
>>
>> >> >> > OK.
>>
>> >> >> > I checked my puppet.conf.
>>
>> >> >> > report = true
>>
>> >> >> > is set correctly..
>>
>> >> >> > But ckecking the $vardir/reports directory on the master I can't find
>> >> >> > any reports from my windows clients.... hmm.
>>
>> >> >> > Maybe I have to run puppet agent --test with any option like --reports
>> >> >> > or something like that.
>>
>> >> >> > Does anybody know of there is an option to turn on reports by running
>> >> >> > puppet?
>>
>> >> >> > On 29 Mrz., 08:11, Corey Osman wrote:
>>
>> >> >> > > I think its just reports=true.
>>
>> >> >> > > When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>>
>> >> >> > > Corey Osman
>> >> >> > > co...@logicminds.biz
>> >> >> > > 678-348-0582 (Pacific Time)
>>
>> >> >> > > Green IT and Datacenter Automation Specialist
>>
>> >> >> > > On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>>
>> >> >> > > > Hi.
>>
>> >> >> > > > Didn't know that the client has to be configured to send out the
>> >> >> > > > facts...
>>
>> >> >> > > > Do you know where to do it?
>>
>> >> >> > > > I'll google meanwhile. Maybe I find some information.
>>
>> >> >> > > > On 28 Mrz., 17:35, Corey Osman wrote:
>> >> >> > > >> Did you configure the puppet windows client to send reports?
>>
>> >> >> > > >> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>>
>> >> >> > > >> Sent from my iPhone
>>
>> >> >> > > >> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>>
>> >> >> > > >>> Hi,
>>
>> >> >> > > >>> I'm using foreman with puppet. It works very good as far as we talk
>> >> >> > > >>> about linux servers.
>>
>> >> >> > > >>> But now I've got some new Winows Servers which are also using puppet
>> >> >> > > >>> (foreman).
>>
>> >> >> > > >>> I created those hosts in foreman and installed puppet on them.
>> >> >> > > >>> everything is quiet good.
>>
>> >> >> > > >>> But can somebody here please tell me why I can't see any facts about
>> >> >> > > >>> my windows servers?
>>
>> >> >> > > >>> For all my linux Servers I can see all the facts about the server by
>> >> >> > > >>> selecting the host -> clicking the box facts on the right side under
>> >> >> > > >>> details.
>>
>> >> >> > > >>> For my windows Servers it just shows:
>>
>> >> >> > > >>> Not entries found
>>
>> >> >> > > >>> Any idea?
>>
>> >> >> > > >>> --
>> >> >> > > >>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> >> >> > > >>> To post to this group, send email to foreman-users@googlegroups.com.
>> >> >> > > >>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> >> >> > > >>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>>
>> >> >> > > > --
>> >> >> > > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> >> >> > > > To post to this group, send email to foreman-users@googlegroups.com.
>> >> >> > > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> >> >> > > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>>
>> >> > --
>> >> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> >> > To post to this group, send email to foreman-users@googlegroups.com.
>> >> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> >> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>>
>> > --
>> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> > To post to this group, send email to foreman-users@googlegroups.com.
>> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> To post to this group, send email to foreman-users@googlegroups.com.
> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/foreman-users?hl=en.
>
> We are running puppetmaster and foreman on the same machine. So we
> also tried following:
>
> rake puppet:import:hosts_and_facts RAILS_ENV=production
>
>
> Same output with no effect.
please provide the logs from foreman when you import your facts…
the error might be there
···
On Thu, Mar 29, 2012 at 10:51 AM, Jay Ze wrote:
>
> On 29 Mrz., 10:47, Jay Ze wrote:
>> No we disabled storeconfigs.
>>
>> On 29 Mrz., 10:45, Corey Osman wrote:
>>
>>
>>
>>
>>
>>
>>
>> > Did you say you were running storeconfigs?
>>
>> > Corey Osman
>> > co...@logicminds.biz
>> > 678-348-0582 (Pacific Time)
>>
>> > Green IT and Datacenter Automation Specialist
>>
>> > On Mar 29, 2012, at 12:02 AM, Jay Ze wrote:
>>
>> > > OK I found out that
>>
>> > > puppet agent --test --report
>>
>> > > seems to do something, although it's not listed as correct option for
>> > > puppet agent (http://docs.puppetlabs.com/man/agent.html)
>>
>> > > But still no reports for my client...
>> > > That's strange. I'll google for some more information about that.
>>
>> > > On 29 Mrz., 08:40, Jay Ze wrote:
>> > >> OK.
>>
>> > >> I checked my puppet.conf.
>>
>> > >> report = true
>>
>> > >> is set correctly..
>>
>> > >> But ckecking the $vardir/reports directory on the master I can't find
>> > >> any reports from my windows clients.... hmm.
>>
>> > >> Maybe I have to run puppet agent --test with any option like --reports
>> > >> or something like that.
>>
>> > >> Does anybody know of there is an option to turn on reports by running
>> > >> puppet?
>>
>> > >> On 29 Mrz., 08:11, Corey Osman wrote:
>>
>> > >>> I think its just reports=true.
>>
>> > >>> When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>>
>> > >>> Corey Osman
>> > >>> co...@logicminds.biz
>> > >>> 678-348-0582 (Pacific Time)
>>
>> > >>> Green IT and Datacenter Automation Specialist
>>
>> > >>> On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>>
>> > >>>> Hi.
>>
>> > >>>> Didn't know that the client has to be configured to send out the
>> > >>>> facts...
>>
>> > >>>> Do you know where to do it?
>>
>> > >>>> I'll google meanwhile. Maybe I find some information.
>>
>> > >>>> On 28 Mrz., 17:35, Corey Osman wrote:
>> > >>>>> Did you configure the puppet windows client to send reports?
>>
>> > >>>>> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>>
>> > >>>>> Sent from my iPhone
>>
>> > >>>>> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>>
>> > >>>>>> Hi,
>>
>> > >>>>>> I'm using foreman with puppet. It works very good as far as we talk
>> > >>>>>> about linux servers.
>>
>> > >>>>>> But now I've got some new Winows Servers which are also using puppet
>> > >>>>>> (foreman).
>>
>> > >>>>>> I created those hosts in foreman and installed puppet on them.
>> > >>>>>> everything is quiet good.
>>
>> > >>>>>> But can somebody here please tell me why I can't see any facts about
>> > >>>>>> my windows servers?
>>
>> > >>>>>> For all my linux Servers I can see all the facts about the server by
>> > >>>>>> selecting the host -> clicking the box facts on the right side under
>> > >>>>>> details.
>>
>> > >>>>>> For my windows Servers it just shows:
>>
>> > >>>>>> Not entries found
>>
>> > >>>>>> Any idea?
>>
>> > >>>>>> --
>> > >>>>>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> > >>>>>> To post to this group, send email to foreman-users@googlegroups.com.
>> > >>>>>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> > >>>>>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>>
>> > >>>> --
>> > >>>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> > >>>> To post to this group, send email to foreman-users@googlegroups.com.
>> > >>>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> > >>>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>>
>> > > --
>> > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
>> > > To post to this group, send email to foreman-users@googlegroups.com.
>> > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
>> > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> To post to this group, send email to foreman-users@googlegroups.com.
> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/foreman-users?hl=en.
>
I will report more when lunchtime is over here in Germany
···
On 29 Mrz., 11:17, Ohad Levy wrote:
> On Thu, Mar 29, 2012 at 10:51 AM, Jay Ze > > wrote:
> > We are running puppetmaster and foreman on the same machine. So we
> > also tried following:
>
> > rake puppet:import:hosts_and_facts RAILS_ENV=production
>
> > Same output with no effect.
>
> please provide the logs from foreman when you import your facts....
> the error might be there
>
>
>
>
>
>
>
>
>
> > On 29 Mrz., 10:47, Jay Ze wrote:
> >> No we disabled storeconfigs.
>
> >> On 29 Mrz., 10:45, Corey Osman wrote:
>
> >> > Did you say you were running storeconfigs?
>
> >> > Corey Osman
> >> > co...@logicminds.biz
> >> > 678-348-0582 (Pacific Time)
>
> >> > Green IT and Datacenter Automation Specialist
>
> >> > On Mar 29, 2012, at 12:02 AM, Jay Ze wrote:
>
> >> > > OK I found out that
>
> >> > > puppet agent --test --report
>
> >> > > seems to do something, although it's not listed as correct option for
> >> > > puppet agent (http://docs.puppetlabs.com/man/agent.html)
>
> >> > > But still no reports for my client...
> >> > > That's strange. I'll google for some more information about that.
>
> >> > > On 29 Mrz., 08:40, Jay Ze wrote:
> >> > >> OK.
>
> >> > >> I checked my puppet.conf.
>
> >> > >> report = true
>
> >> > >> is set correctly..
>
> >> > >> But ckecking the $vardir/reports directory on the master I can't find
> >> > >> any reports from my windows clients.... hmm.
>
> >> > >> Maybe I have to run puppet agent --test with any option like --reports
> >> > >> or something like that.
>
> >> > >> Does anybody know of there is an option to turn on reports by running
> >> > >> puppet?
>
> >> > >> On 29 Mrz., 08:11, Corey Osman wrote:
>
> >> > >>> I think its just reports=true.
>
> >> > >>> When I get a chance I test the new windows puppet installer on my windows system and see what I get.
>
> >> > >>> Corey Osman
> >> > >>> co...@logicminds.biz
> >> > >>> 678-348-0582 (Pacific Time)
>
> >> > >>> Green IT and Datacenter Automation Specialist
>
> >> > >>> On Mar 28, 2012, at 10:25 PM, Jay Ze wrote:
>
> >> > >>>> Hi.
>
> >> > >>>> Didn't know that the client has to be configured to send out the
> >> > >>>> facts...
>
> >> > >>>> Do you know where to do it?
>
> >> > >>>> I'll google meanwhile. Maybe I find some information.
>
> >> > >>>> On 28 Mrz., 17:35, Corey Osman wrote:
> >> > >>>>> Did you configure the puppet windows client to send reports?
>
> >> > >>>>> Note: windows is not fully supported but most of it works. You should be able to see the facts.
>
> >> > >>>>> Sent from my iPhone
>
> >> > >>>>> On Mar 28, 2012, at 4:32 AM, Jay Ze wrote:
>
> >> > >>>>>> Hi,
>
> >> > >>>>>> I'm using foreman with puppet. It works very good as far as we talk
> >> > >>>>>> about linux servers.
>
> >> > >>>>>> But now I've got some new Winows Servers which are also using puppet
> >> > >>>>>> (foreman).
>
> >> > >>>>>> I created those hosts in foreman and installed puppet on them.
> >> > >>>>>> everything is quiet good.
>
> >> > >>>>>> But can somebody here please tell me why I can't see any facts about
> >> > >>>>>> my windows servers?
>
> >> > >>>>>> For all my linux Servers I can see all the facts about the server by
> >> > >>>>>> selecting the host -> clicking the box facts on the right side under
> >> > >>>>>> details.
>
> >> > >>>>>> For my windows Servers it just shows:
>
> >> > >>>>>> Not entries found
>
> >> > >>>>>> Any idea?
>
> >> > >>>>>> --
> >> > >>>>>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >> > >>>>>> To post to this group, send email to foreman-users@googlegroups.com.
> >> > >>>>>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >> > >>>>>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> >> > >>>> --
> >> > >>>> You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >> > >>>> To post to this group, send email to foreman-users@googlegroups.com.
> >> > >>>> To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >> > >>>> For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> >> > > --
> >> > > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> >> > > To post to this group, send email to foreman-users@googlegroups.com.
> >> > > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> >> > > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups "Foreman users" group.
> > To post to this group, send email to foreman-users@googlegroups.com.
> > To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
OK. We found the following lines in the log [ it has ∞ lines ]:
INSERT INTO "fact_values" ("updated_at", "created_at", "value",
"fact_name_id", "host_id") VALUES ('2012-03-29 09:40:01.882147',
'2012-03-29 09:40:01.882147', 'winsrv', 148, 342) RETURNING "id"
Failed to save winsrv.domain.com: PGError: ERROR: invalid byte
sequence for encoding "UTF8": 0xe46973
Started GET "/hosts/winsrv.domain.com" for 10.61.203.71 at Thu Mar 29
11:40:25 +0200 2012
Parameters: {"id"=>"winsrv.domain.com"}
I’m using foreman with puppet. It works very good as far as we talk
about linux servers.
But now I’ve got some new Winows Servers which are also using puppet
(foreman).
I created those hosts in foreman and installed puppet on them.
everything is quiet good.
But can somebody here please tell me why I can’t see any facts about
my windows servers?
For all my linux Servers I can see all the facts about the server by
selecting the host -> clicking the box facts on the right side under
details.
For my windows Servers it just shows:
Not entries found
Any idea?
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
–
You received this message because you are subscribed to the Google Groups “Foreman users” group.
To post to this group, send email to foreman-users@googlegroups.com.
To unsubscribe from this group, send email to foreman-users+unsubscribe@googlegroups.com.
For more options, visit this group athttp://groups.google.com/group/foreman-users?hl=en.
